Beschrijving


Important: the drying mode does not replace sterilization. After drying, one of the sterilization temperature modes must be selected.
Rules for using the drying mode
- Place instruments without kraft bags.
- Remove visible water drops before loading.
- Do not overload the chamber: recommended fill level — up to 70%.
- After drying, be sure to run the sterilization mode.
- For best results, it is recommended to air-dry the instruments beforehand for at least 8 hours.
If instruments that are too wet are loaded, or if the 80°C mode is used incorrectly, a residue may appear on the metal surface.
Warranty
24 months
How to use / FAQ
1. What is the ÜLKA dry heat sterilizer used for?
It is used for the thermal treatment of metal manicure and pedicure instruments.
2. Who is the ÜLKA dry heat sterilizer suitable for?
For nail techs, beauty salons, nail studios, training centers, and offices with a high client flow.
3. Which instruments can be sterilized in the dry heat sterilizer?
Metal instruments: scissors, nippers, pushers, drill bits, and other instruments that can withstand high temperatures.
4. Is the dry heat sterilizer suitable for large salons?
Yes, thanks to 7 loading levels and a capacity of up to 14 large kraft bags.
5. What is the 80°C drying mode for?
For preparing instruments before sterilization and removing residual moisture.
6. Does the drying mode replace sterilization?
No, drying is only a preparatory stage. Afterward, the sterilization mode must be run.
7. Can instruments be dried in kraft bags?
No, in drying mode instruments should be placed without kraft bags.
8. Why can a residue appear on instruments after drying?
Due to loading instruments that are too wet, leftover water, or improper use of the 80°C mode.
9. How should instruments be properly prepared for drying?
Remove visible water drops, avoid overloading the chamber, and, if possible, air-dry the instruments beforehand.
10. Can the chamber be completely filled?
No, the recommended fill level is up to 70%, so that hot air can circulate evenly.
11. How many kraft bags does the dry heat sterilizer hold?
From 14 to 49 kraft bags.
12. Which kraft bags does the manufacturer recommend?
Branded ÜLKA kraft bags, compatible with the Jupiter 10V PRO models.


Important: the drying mode does not replace sterilization. After drying, one of the sterilization temperature modes must be selected.
Rules for using the drying mode
- Place instruments without kraft bags.
- Remove visible water drops before loading.
- Do not overload the chamber: recommended fill level — up to 70%.
- After drying, be sure to run the sterilization mode.
- For best results, it is recommended to air-dry the instruments beforehand for at least 8 hours.
If instruments that are too wet are loaded, or if the 80°C mode is used incorrectly, a residue may appear on the metal surface.
Warranty
24 months
How to use / FAQ
1. What is the ÜLKA dry heat sterilizer used for?
It is used for the thermal treatment of metal manicure and pedicure instruments.
2. Who is the ÜLKA dry heat sterilizer suitable for?
For nail techs, beauty salons, nail studios, training centers, and offices with a high client flow.
3. Which instruments can be sterilized in the dry heat sterilizer?
Metal instruments: scissors, nippers, pushers, drill bits, and other instruments that can withstand high temperatures.
4. Is the dry heat sterilizer suitable for large salons?
Yes, thanks to 7 loading levels and a capacity of up to 14 large kraft bags.
5. What is the 80°C drying mode for?
For preparing instruments before sterilization and removing residual moisture.
6. Does the drying mode replace sterilization?
No, drying is only a preparatory stage. Afterward, the sterilization mode must be run.
7. Can instruments be dried in kraft bags?
No, in drying mode instruments should be placed without kraft bags.
8. Why can a residue appear on instruments after drying?
Due to loading instruments that are too wet, leftover water, or improper use of the 80°C mode.
9. How should instruments be properly prepared for drying?
Remove visible water drops, avoid overloading the chamber, and, if possible, air-dry the instruments beforehand.
10. Can the chamber be completely filled?
No, the recommended fill level is up to 70%, so that hot air can circulate evenly.
11. How many kraft bags does the dry heat sterilizer hold?
From 14 to 49 kraft bags.
12. Which kraft bags does the manufacturer recommend?
Branded ÜLKA kraft bags, compatible with the Jupiter 10V PRO models.
ÜLKA Hetelucht-sterilisator Jupiter 10V PRO
SKU:J_10v_pro
- Regular price
- €520,00
- Sale price
- €520,00
- Regular price
-
€650,00